- Input attribute optimization for thermal deformation of machine-tool spindles using artificial intelligence
|
- Towards greener buildings: A review on the role of fluidic windows with embedded microfluidic channels for energy saving in the building setups
|
- Synergistic thermal and hydrodynamic effects in 3D-printed heat sinks with intricate microchannel patterns
|
- Heating and defrosting performance assessment of dual-source heat pump operational modes under various ambient conditions
|
- Wireless-based portable device heart rate measurement as biomedical devices for stress detection
|
- Psychological Stress Classification Using Extreme Gradient Boosting Algorithm
|
- Bio-Signal Acquisition System for Psychological Stress Classification
|
- Hydrodynamic influence on thermal management of flexible heatsink devices embedded with out-of-plane intricate microchannel design
|
- Thermal deformation and economic analysis of a multiobject cooling system for spindles with varied coolant volume control
|
- Energy-Efficient Approaches for a Machine Tool Building in a University through Field Measurement and Energy Modelling
|
- Comparative analysis of the static and dynamic dehumidification performance of metal-organic framework materials
|
- Combining Deep Neural Network with Genetic Algorithm for Axial Flow Fan Design and Development
|
- Effect of Coolant Temperature on the Thermal Compensation of a Machine Tool
|
- Microfluidic modular heat sink with improved material characteristics towards thermal management of flexible electronics
|
- A Study on Flow Field Characteristics and Air Purifier with Barrier Effects
|
- Coolant Volume Prediction for Spindle Cooler with Adaptive Neuro-fuzzy Inference System Control Method
|
- The effect of hydrogen production rate of the via different preparation of co-based catalyst with sodium borohydride
|
- Performance enhancement of a sludge continuous feed heat pump drying system by air deflectors and auxiliary cooling subsystems
|
- Performance analysis of high-temperature two-stage compression heat pump with vapor injection dynamic control
|
- Two-tailed fuzzy hypothesis testing for unilateral specification process quality index
|
- Preparation of catalyst for hydrogen production reaction of sodium borohydride and its effectiveness
|
- Atomistic full-quantum and full-band transport model for zigzag group-IVA nanoribbon-based structures with noniterative calculation framework
|
- Increase in accuracy of a built-in spindle by adaptive cooling control with varied coolant volume and temperature
|
- Dehumidification effect of polymeric superabsorbent SAP-LiCl composite desiccant-coated heat exchanger with different cyclic switching time
|
- The fuzzy process quality evaluation model for the stb quality characteristic of machining
|
- Eco-green portable wireless power charger design with low-voltage, high-current fuel cell power source features
|
- Water heating and operational mode switching effects on the performance of a multifunctional heat pump
|
- Performance analysis of two-stage solid desiccant densely coated heat exchangers
|
- Machining accuracy enhancement of a machine tool by a cooling channel design for a built-in spindle
|
- Cooling Channel Design for a Built-in Spindle of a Machine Tool
|
- Numerical and Experimental Analysis of a Drying Chamber of a Heat Pump Sludge Drying System
|
- Wireless Photoplethysmography Sensor for Continuous Blood Pressure Biosignal Shape Acquisition
|
- Enhancement of machining accuracy utilizing varied cooling oil volume for machine tool spindle
|
- Automatic wireless ambient air and weather condition monitoring system for outdoor environment monitoring applications
|
- Wireless power hanger pad for portable wireless audio device power charger application
|
- Effect of Supply Cooling Oil Temperature in Structural Cooling Channels on the Positioning Accuracy of Machine Tools
|
- Single-layer transmitter array coil pattern evaluation toward a uniform vertical magnetic field distribution
|
- Performance enhancement of hybrid solid desiccant cooling systems by integrating solar water collectors in Taiwan
|
- Effect of the Receiver Coil Rotational Motion on Induction Voltage of Wireless Power Charging
|
- Positioning accuracy improvement of machine tools by embedded cooling channels
|
- Performance analysis of single-stage air source heat pump utilizing indirect vapor injection design
|
- Temperature control scheme using hot-gas bypass for a machine tool oil cooler
|
- Performance analysis of heat pump sysytem with air and water dual sources
|
- Intelligent high-performance dynamic control for two-stage screw high-temperature heat pump system
|
- Aspect Ratio Effect on Laminar Flow Bifurcations in a Curved Rectangular Tube Driven by Pressure Gradients
|
- Direct methanol fuel cell bubble removal mechanism using magnetic actuation
|
- Operational temperature effect on positioning accuracy of a single-axial moving carrier
|
- Effects of process air conditions and switching cycle period on dehumidification performance of desiccant-coated heat exchangers
|
- Fuel concentration and operating temperature effects on critical amounts of catalysts added to the fuel channels of direct methanol fuel cell
|
- Development and analysis of a new multi-function heat recovery split air conditioner with parallel refrigerant pipe
|
- Performance analysis of direct methanol fuel cells by coating different proportions of catalysts onto fuel channels
|
- Development and analysis of a multifunction heat recovery air conditioner with parallel refrigerant pipe design
|
- Environmental temperature control in a processing area of a machine tool
|
- Performance enhancement of single stage air source heat pump with a hot gas bypass loop design
|
- Aspect Ratio Effect on Multiple Flow Solutions in a Two-Sided Parallel Motion Lid-Driven Cavity
|
- Humidity and cycle period effect on hygroscopic efficiency of desiccant coating heat exchangers with different desiccants
|
- Hygroscopic efficiency analysis of desiccant coating heat exchangers with different solid desiccants
|
- Hygroscopic efficiency analysis of desiccant coating heat exchangers with different solid desiccants
|
- Performance enhancement of twin stack direct methanol fuel cells by coating active carbon catalyst on fuel channels
|
- Fabrication of V-groove high temperature oxygen sensor by gallium oxide
|
- Analyses of polymer passivation on the surface reflectivity of GaAs/AlGaAs solar cell
|
- Effect of copper channel widths on the performance of direct methanol fuel cells under various operating temperatures
|
- Multiplicity of steady solutions in a two-sided lid-driven cavity with different aspect ratios
|
- Construction and analysis of personalized air-conditioning system
|
- Multiplicity flow solutions in a four-sided lid-driven cavity
|
- Analysis of proportional microfluidic mixing in a sequential injection micro-mixer
|
- Performance analysis of twin stack direct methanol fuel cells with hydrophilic and hydrophobic anode channels
|
- Dimensional effect of microchannels on microfluidic electrokinetic instability
|
- Experiment and numerical simulation of utilizing a vertical garden to reduce indoor carbon dioxide quantity
|
- Fabrication of nitride-based UV LEDs with low dislocation GaN buffer layers
|
- Separation and trapping of microparticles utilizing ac electroosmotic flow in a y-shaped microchannel with asymmetric electrode pairs
|
- Utilizing optical technique to develop an intelligent bio-chip monitoring system
|
- Twin stack of direct Methanol Fuel Cells with hydrophobic anode channels
|
- A case study on energy saving of the facility systems for 12-inch semiconductor wafer fabs in Taiwan
|
- Analysis of traveling-wave electro-osmotic pumping with double-sided electrode arrays
|
- Effect of particle sizes on the particle restraint and removal efficiencies in a laboratory utilizing a lagrangian particle-tracking method
|
- Tri-state switching behavior in a GaAs/InGaAs barrier structure
|
- Effects of electrode array dimensions on the pumping performance of traveling-wave electro-osmotic micro-pumps
|
- The performance analysis of direct methanol fuel cells with different hydrophobic anode channels
|
- The effect of air supply and air exhaust locations on particle restraint and removal in a laboratory utilizing a Lagrangian particle-tracking method
|
- Electrokinetic instability induced valveless multi-switching in a microfluidic chip
|
- The efficiency analysis of DMFCs with different hydrophobic anode channels
|
- Experimental observation of valveless multi-switching phenomenon in a microfluidic bio-chip using electrokinetic instability
|
- The optimum design of traveling-wave electroosmotic micropumps
|
- Microfluidic mixing with electrokinetic instability in a double T-shaped microchannel
|
- Effect of ionic concentration on electrokinetic instability in a cross-shaped microchannel
|
- Multicast services of digital television in a new management framework
|
- A user-friendly web content management system
|
- Microfluidic mixing with electrokinetic instability stirring by electrical field intensity perturbations
|
- Proportional mixing of microfluidic flows utilizing DC and AC electric fields in a T-type microchannel
|
- Transient response of a spiral fin with its base subjected to the variation of heat flux
|
- Multicast services of digital television in a new management framework
|
- Influence of different gas environments on the formation of thin film polysilicon by excimer laser annealing
|
- Evaporation of non-Newtonian fluid in porous medium under mixed convection
|
- Multiple fluid flow and heat transfer solutions in a two-sided lid-driven cavity
|
- Analysis of electrokinetic mixing using AC electric field and patchwise surface heterogeneities
|
- Electroosmotic flow driven by DC and AC electric fields in curved microchannels
|
- Transient electroosmotic flow induced by AC electric field in micro-channel with patchwise surface heterogeneities
|
- Sample flow switching techniques on microfluidic chips
|
- Transient analysis of electro-osmotic secondary flow induced by dc or ac electric field in a curved rectangular microchannel
|
- Time- and frequency- domain analysis of transient electroosmotic flow induced by sinusoidal ac electric field in a curved microtube
|
- Electrokinetically driven microfluidic mixing with patchwise surface heterogeneity and AC applied electric field
|
- Transient electroosmotic flow induced by DC or AC electric fields in a curved microtube
|
- Flow bifurcations in a square curved tube for small curvature ratio
|
- Flow bifurcation and transition in a gap between two-rotating spheres
|
- Flow bifurcations in a thin gap between two rotating spheres
|
- Flow bifurcation and heat transfer in a spherical gap
|
- Turbine blade heat transfer prediction in flow transition using k – ω two – Equation model
|
- Turbine blade heat transfer prediction in flow transition using k-ω two-equation model
|
- Numerical study of boundary layer transition and heat transfer in turbines
|
系所介紹
師資簡介
實驗室簡介
課程規劃
系友專區
搜尋網站
