border

師資簡介

members

首頁 師資簡介 楊愷祥
icon
主要經歷：　　　　
服 務 單 位 服 務 部 門 職 稱 起 訖 年 月
國立勤益科技大學 冷凍空調與能源系 教授 2024/02至今
台灣熱質傳學會   常務理事 2022/12至今
台灣冷凍空調學會   理事 2023/06至今
台灣熱管理協會   副秘書長 2022/08至今
美國冷凍空調工程師協會台灣分會 台灣分會 理事 2022/07至今
國立勤益科技大學 冷凍空調與能源系 副教授 2021/02至2024/02
國立勤益科技大學 冷凍空調與能源系 助理教授 2019/02至 2021/01
台灣熱質傳學會   理事 2016/12至2020/11
台灣熱管理協會   副秘書長 2015/11至2020/12
工業技術研究院 綠能與環境研究所 資深研究員 2013/07至2019/01
工業技術研究院 綠能與環境研究所 研究員 2010/11至2013/06
明道大學 光電暨能源工程學系 助理教授 2009/08至2010/07
工業技術研究院 能源與環境研究所 研究員 2004/10至2009/07
工業技術研究院 能源與環境研究所 約聘人員 2001/07至2004/06
工業技術研究院 能源與資源研究所 約聘人員 1999/07至2000/06

研究計畫執行：
日期 計 畫 名 稱 主要負責工作
114.11~115.12 固態充填測試驗證
(NCUT 25-T-ER-117)		 計畫主持人
114.11~115.12 冷媒直膨冷板性能測試
(NCUT 25-T-ER-118)		 計畫主持人
114.10~115.12 熱交換器樣品製作與結霜觀測影像分析(NCUT 25-T-ER-116) 計畫主持人
114.09~115.12 兩相冷媒散熱測試系統性能委託測試
(NCUT 25-T-ER-108)		 計畫主持人
114.09~115.12 熱交換器結霜觀測實驗
(NCUT 25-T-ER-086)		 計畫主持人
114.08~115.07 創新防霜設計熱傳及結霜特性研究
(NSTC 114-2221-E-167-029)		 計畫主持人
114.05~115.12 散熱模組性能測試與分析
(NCUT 25-T-ER-053)		 計畫主持人
114.04~114.11 開飲機動態能效研究及市售產品動態運轉資料量測(NCUT 25-T-ER-050) 計畫主持人
114.03~115.12 壓縮機驅動雙相循環性能量測與參數分析(NCUT 25-T-ER-034) 計畫主持人
114.03~115.12 冰水機實驗室測試資料與空調箱技術研析(NCUT 25-T-ER-030) 計畫主持人
113.08~114.07 不同航空高空下熱交換器冷凝與結霜性能研究(NSTC 113-2221-E-167-047) 計畫主持人
113.08~114.12 液態除濕吸收劑熱力學性質測試(NCUT 24-T-ER-060) 計畫主持人
113.06~114.12 吸收劑焓值測試(NCUT 24-T-ER-048) 計畫主持人
113.04~114.12 冰水機實驗室測試資料分析與測試工具開發(NCUT 24-T-ER-027) 計畫主持人
112.10~113.09 基於MBSE與MOST架構之高能雷射系統研發(2/2)
(NSTC 112-2218-E-606-002)		 分項計畫主持人
112.06~113.05 可變熱傳導性能熱管應用於電動車電池控溫(NSTC 112-2622-E-167-009) 計畫主持人
112.04~113.12 國際研究機構之研究分析報告 (NCUT 23-T-ER-026) 計畫主持人
112.03~113.12 國際冰水主機能效管理現況盤查與實驗室測試資料分析
(NCUT 23-T-ER-016)		 計畫主持人
111.11~114.10 節能減碳技術諮詢與輔導(70617534) 計畫主持人
111.10~112.09 基於MBSE與MOST架構之高能雷射系統研發(1/2)
(NSTC 111-2623-E-606-002)		 分項計畫主持人
111.09~112.12 太空用熱管設計與性能分析委託(NCUT 22-T-ER-061) 計畫主持人
111.08~112.12 國際冰水主機部分負載能效管理現況盤查與規劃(NCUT 22-T-ER-050) 計畫主持人
111.08~111.10 相變化材料延遲溫升效益驗證計畫(NCUT 22-T-ER-045) 計畫主持人
111.08~112.07 修飾表面防霜技術於熱交換器節能研究(3/3)
(MOST 109-2628-E-167-001-MY3)		 計畫主持人
111.05~112.12 國際研究機構之研究內容分析報告
(NCUT 22-T-ER-026)		 計畫主持人
111.03~112.12 熱烘系統理論分析演算法
(NCUT 22-T-ER-009)		 計畫主持人
110.11~111.10 智能化食品乾燥二氧化碳熱泵系統開發(MOST 110-2622-E-150-016) 分項計畫主持人
110.11~111.10 高功率電池模組散熱技術
(MOST 110-2622-E-167-014)		 計畫主持人
110.11~111.10 冷凍空調與節能技術開發諮詢與輔導(3/3) (70617534) 計畫主持人
110.08~111.07 修飾表面防霜技術於熱交換器節能研究(2/3)
(MOST 109-2628-E-167-001-MY3)		 計畫主持人
110.05~111.12 超疏水表面於介電液兩相熱傳特性分析研究(NCUT 21-T-ER-045) 計畫主持人
110.02~111.01 智慧型熱泵產業鏈技術應用與推廣聯盟(1/3)
(MOST 110-2622-8-167-002-TE5)		 分項計畫主持人
109.11~110.10 冷凍空調與節能技術開發諮詢與輔導(2/3) (70617534) 計畫主持人
109.09~112.08 熱負荷計算軟體開發驗證計畫
(NCUT 20-T-ER-072)		 分項計畫主持人
109.08~110.07 修飾表面防霜技術於熱交換器節能研究(1/3)
(MOST 109-2628-E-167-001-MY3)		 計畫主持人
109.04~109.11 外加吸附除濕系統對熱泵乾燥機性能影響理論及實驗分析
(NCUT 20-T-ER-032)		 計畫主持人
109.03~109.11 小型冷凍冷藏儲冷系統開發
(NCUT 20-T-ER-028)		 計畫主持人
108.11~109.10 冷凍空調與節能技術開發諮詢與輔導(1/3) (70617534) 計畫主持人
108.10~108.12 超薄銅合金加工-vapor chamber製作與性能分析(NCUT 19-O-ER-002) 計畫主持人
108.09~110.03 工業用熱管技術研發計畫
(MOST 108-3116-F-167-001-CC1)		 計畫主持人
108.07~109.12 空調系統相關冷凝對流資料收集歸納與整理 (NCUT 19-T-ER-055) 計畫主持人
108.06~109.12 冷凍冷藏儲冷系統設計開發
(NCUT 19-T-ER-043)		 計畫主持人
108.06~110.05 環繞熱管測試與分析
(NCUT 19-T-ER-041)		 分項計畫主持人
108.06~109.12 非均勻匯流腔脈衝式熱管性能測試(NCUT 19-T-ER-042) 分項計畫主持人
108.05~108.12 超薄銅合金加工-vapor chamber結構與性能分析(NCUT 19-O-ER-001) 計畫主持人
108.04~108.11 環境溫濕度對熱交換器熱質傳及壓降影響分析(NCUT 19-T-ER-022) 計畫主持人
108.04~108.11 脈衝式熱管深入研究
(NCUT 19-T-ER-026)		 計畫主持人
107.01~107.12 被動式高功率雷射投影機傳熱技術(H301AR6100) 計畫主持人
107.01~107.12 600公升系列變頻冰箱性能分析
(H655RJ1400)		 計畫主持人
106.10~106.12 雷射光源性能量測系統開發計畫
(G655RJ1400)		 計畫主持人
106.03~106.12 無轉動式高功率雷射投影光引擎技術
(G301ARY550)		 計畫主持人
105.01~105.12 雷射投影機之螢光色輪熱傳分析暨散熱性能改善(F655RD1600) 計畫主持人
104.01~104.12 高功率投影機-螢光粉色輪散熱與性能改善計畫(E655RD1500) 計畫主持人
103.10~104.07 工作流體研發(D655RD1A00) 計畫主持人
103.06~103.11 LED熱阻分析與高導熱元件技術開發
(D755CD614D )		 計畫主持人
103.02~103.12 高導熱元件技術開發計畫(D655RD1200) 計畫主持人
103.01~103.12 高導熱元件技術(D455CD6160)    計畫主持人
102.02-102.12 高效能固態照明技術研發計畫-散熱分項(C455CD6160) 計畫主持人
101.02-101.12 高效率固態照明技術發展與推廣應用計畫-散熱分項(B455CD6160) 計畫主持人
100.04-100.09 矽基微平板型熱管
(A301ARY540)		 計畫主持人
99.09-100.12 LED照明應用技術與製程設備開發計畫 (A455CD6110) 研究人員
99.01-99.07 窩型渦流產生器應用於氣冷式散熱模組之分析及最佳化 (P0980113) 計畫主持人
98.07-98.12 新型態無動件微閥門(II) (8101QV3HV0) 計畫主持人
98.01-98.06 不結露之電子散熱冷凍系統 (8101QV3110) 計畫主持人
98.01-98.08 化學反應增強之被動式微混合器研發(8101QV3HP0) 研究人員
98.01-98.12 新冷媒冰箱計畫 (8455CD3110) 研究人員
97.07-98.01 模組化小型溫控系統 (7101QV3630) 計畫主持人
97.06-98.01 新型態無動件微閥門 (7101QV3510) 計畫主持人
97.01-97.12 新冷媒冰箱計畫 (7455CD3110) 研究人員
96.01-96.12 雙向驅動之串聯無閥式微幫浦 (6301XS6700) 計畫主持人
95.11-96.07 赴UCB參與菁英計畫-奈米結構應用於燃料純化分離、奈米結構應用於平板型熱管 (5C55KTE300) 計畫主持人
95.01-95.11 串聯式壓電無閥微泵 (5301XSY750) 計畫主持人
95.01-95.12 筆記型電腦用微環路式散熱系統(5301XSD110) 研究人員
94.01-94.12 小型空調系統性能提昇 (F446CA1610) 研究人員
 



獲獎紀錄 
 
  • 優秀年輕學者計畫, 2020, 科技部
  • General Chair, 9th Micro & Nanoscale Heat Transfer and Energy Workshop 2013
  • 中國機械工程師學會優秀青年工程師
  • Guest Editors, 2021, Processes, Special Issue: Emerging Technologies in Heating, Ventilation, Air Conditioning and Refrigeration (HVAC&R) Systems (SCI, IF:3.352)
  • Guest Editors, 2022, Processes, Special Issue: Emerging Technologies in Heating, Ventilation, Air Conditioning and Refrigeration (HVAC&R) Systems (Second Volume) (SCI, IF:3.352)
  • 工研院傑出研究獎銅牌獎(代表人)
  • 救國團新竹地區「105年社會優秀青年」
  • 工研院精英2008計劃
  • 國防役績優人員
  • 2013工研院品質典範 (計畫主持人)
  • 2010 台灣熱管理協會年會暨技術成果發表會優等論文
  • 2012 台灣熱管理協會年會暨技術成果發表會論文第三名
  • 2014 台灣熱管理協會年會暨技術成果發表會論文佳作
  • 2015 台灣熱管理協會年會暨技術成果發表會論文佳作
  • 2016 綠能所年度論文獎
  • 2017台灣熱管理協會年會暨技術成果發表會ICA最佳論文獎
  • 2017工研院專利布局綠能所第二名 (計畫主持人)
  • 2018 台灣熱管理協會年會暨技術成果發表會論文佳作
  • 2019 第五屆旭泰科技論文獎-高速主軸創新應用實作競賽類別旭泰銀獎
  • Organizing Committee, 2019, 1st Asia-Pacific Thermofluid Science & Engineering Conference.
  • Session chair, 2019, 1st Asia-Pacific Thermofluid Science & Engineering Conference.
  • Session chair, 2019,第二十九屆燃燒與能源學術研討會
  • Session chair, 2019, 綠色科技工程與應用研討會
  • 國立勤益科技大學108年度學術期刊論文獎
  • 國立勤益科技大學109年度學術期刊論文獎
  • 國立勤益科技大學110年度學術期刊論文獎
  • 國立勤益科技大學109年度工程學院績效優良教師一般研究計畫類第三名
  • 國科會工程處112年度「產學合作計畫成果發表暨績效考評會」B類海報組優良, 計畫主持人
  • 國科會工程處112年度「產學合作計畫成果發表暨績效考評會」B類海報組特優, 共同計畫主持人

 

研究成果目錄：
＊SCI/EI國際期刊71篇  　 ＊國內期刊50篇              ＊國外研討會論文45篇　　＊國內研討會論文49篇　　
＊專利9件19項         ＊被引用次數3110次 (Google scholar)   ＊h指數31 (Google scholar) ＊i10指數51 (Google scholar) 

 
  1. Chi-Chuan Wang, Kai-Shing Yang, Yu-Juei Chang, and Ding-Chong Lu, 2000,” Characteristics of air–water two‐phase flow in a 3‐mm smooth tube”, Canadian Journal of Chemical Engineering, 78, pp. 1011-1016. (SCI) (IF:1.9, Ranking:112/176, Cites:16)
  2. Ing-Young Chen, Kai-Shing Yang, Yu-Juei Chang, and Chi-Chung Wang, 2001, “Two-phase pressure drop of air–water and R-410A in small horizontal tubes”, Int. J. of Multiphase Flow, 27, pp. 1293-1299. (SCI) (IF:3.8, Ranking:36/171, Mechanics, Cites:252)
  3. Ing-Young Chen, Kai-Shing Yang and Chi-Chung Wang, 2001, ” Two-phase pressure drop of air-water in small horizontal tubes”, J. of Thermophysics and Heat Transfer, 15, pp. 409-415. (SCI) (IF:1.7, Ranking:118/182, Thermodynamics, Cites:11)
  4. Kai-Shing Yang, Ing-Young Chen, Robert Hu and Chi-Chung Wang, 2002, “Some Observations of the Two-phase Flow Characteristics Within a 3-mm Diameter Tube”, ASHRAE Transactions, pp. 529-536. (EI) (Cites : 8)
  5. Ing-Young Chen, Kai-Shing Yang, and Chi-Chung Wang, 2002, “An empirical correlation for two-phase frictional performance in small diameter tubes”, International J. of Heat and Mass Transfer, 45, pp. 3667-3671. (SCI) (IF :5.8, Ranking:14/171, Mechanics, Cites:104)
  6. Kai-Shing Yang, Ing-Young Chen, Bor-Yuan Shew, and Chi-Chuan Wang, 2003, “Investigation of the flow characteristics within a micronozzle/diffuser”, Journal of Micromechanics and Microengineering, 14, pp. 26-31. (SCI) (IF:2.1, Ranking:43/79, Instruments & Instrumentation, Cites:88)
  7. Kai-Shing Yang*, Ing-Young Chen and Chi-Chung Wang, 2004, “A numerical study of inkjet refilling”, Proc. IMechE, Part C: Journal of Mechanical Engineering Science, 218, pp. 1481-1497. (SCI) (IF:1.7, Ranking:109/184, Cites:1)
  8. Kai-Shing Yang*, Ing-Young Chen, and Chi-Chung Wang, 2006, “Performance of Nozzle/Diffuser Micro‐Pumps Subject to Parallel and Series Combinations”, Chemical Engineering & Technology, 29, pp. 703-710. (SCI) (IF:1.6, Ranking:119/176, Cites:32)
  9. Kai-Shing Yang*, Min-Sheng Liu, Ing-Young Chen, and Chi-Chuan Wang, 2006, “Analysis of microdiffuser/nozzles”, Proc. IMechE, Part C: Journal of Mechanical Engineering Science, 220, pp. 1289-1296. (SCI) (IF:1.7, Ranking:109/184, Cites:5)
  10. Kai-Shing Yang*, Ching-Ming Chiang, Yur-Tsai Lin, Kuo-Hsiang Chien, and Chi-Chuan Wang, 2007, “On the heat transfer characteristics of heat sinks: Influence of fin spacing at low Reynolds number region”, International J. of Heat and Mass Transfer, 50, pp. 2667-2674. (SCI) (IF :5.8, Ranking:14/171, Mechanics, Cites:55)
  11. Kai-Shing Yang, Wei-Hsin Chu, Ing Yong Chen, and Chi-Chuan Wang, 2007, “A comparative study of the airside Performance of Heat Sinks Having Pin Fin Configurations”, International J. of Heat and Mass Transfer, 50, pp. 4661-4667. (SCI) (IF :5.8, Ranking:14/171, Mechanics, Cites:148)
  12. Kai-Shing Yang*, Ing-Young Chen, Kuo-Hsiang Chien, and Chi-Chung Wang, 2008, “A Numerical Study of the Nozzle/Diffuser Micropump”, Proc. IMechE, Part C: Journal of Mechanical Engineering Science, 222, pp. 525-533. (SCI) (IF:1.7, Ranking:109/184, Cites:21)
  13. Yu-Lieh Wu, Kai-Shing Yang, Min-Yi Chen, Chi-Chuan Wang, 2010, “A Novel Condensate-Free Refrigerated Cold Plate for Electronic Cooling”, HVAC&R Research, 16, pp.3-14. (IF:439, Ranking: 122/182, Engineering, Mechanical, Cites:1)
* HVAC&R Research 2015年更名為Science and Technology for the Built Environment
  1. Kai-Shing Yang, Jhih-Hao Jhong, Yur-Tsai Lin, Kuo-Hsiang Chien, Chi-Chuan Wang, 2010, “On the heat transfer characteristics of heat sinks: with and without vortex generators”, IEEE Transactions on Components and Packaging Technologies,33,pp.391-397. (IF:3.0, Ranking:158/368, Engineering, electrical & electronic, Cites:36)
* IEEE Transactions on Components & Packaging Technologies 2011年更名為IEEE Transactions on Components Packaging and Manufacturing Technology
  1. Kai-Shing Yang, Wen-Ruey Chang, Young Chen, Chi-Chuan Wang, 2010, “An investigation of a top-mounted domestic refrigerator”, Energy conversion and management,51, pp.1422-1427. ((IF : 10.9, Ranking : 2/79, Thermodynamics, Cites:58)
  2. Kai-Shing Yang, Kun-Huang Yu, Ing Young Chen, and Chi-Chuan Wang, 2010, “Influence of Inlet Configurations on the Refrigerant Distribution of a Dual Cold-plate System”, Heat Transfer Engineering, 31, pp.692-698. (SCI) (IF:1.6, Ranking:122/182, Engineering, Mechanical)
  3. Kai-Shing Yang, Ing-Youn Chen, Chi-Chuan Wang, and Jin-Cherng Shyu, 2010, “Novel No-moving-part Valves for Microfluidic Devices”, Microsystem Technologies, 16, 1691-1697. (SCI) (IF:1.737, Ranking:96/155, Cites:14)
  4. Kai-Shing Yang, Shu-Lin Li, Ing Youn Chen, Kuo-Hsiang Chien, and Chi-Chuan Wang, 2010, “An experimental investigation of air cooling thermal module using various enhancements at low Reynolds number region”, International J. of Heat and Mass Transfer, 53, pp. 5675-5681. (SCI) (IF :5.8, Ranking:14/171, Mechanics, Cites:70)
  5. Kai-Shing Yang, Yeau-Ren Jeng, Chun-Min Huang, and Chi-Chuan Wang, 2011, “Heat Transfer and Flow Pattern Characteristics for HFE-7100 Within Microchannel Heat Sinks”, Heat Transfer Engineering, 32, 697-704. (SCI) (IF:1.6, Ranking:122/182, Engineering, Mechanical, Cites:37)
  6. Chi-Chuan Wang, Kai-Shing Yang, Yang-Ping Liu, and Ing Youn Chen, 2011, “Effect of cannelure fin configuration on compact aircooling heat sink”, Applied Thermal Engineering, 31, 1640-1647. (SCI) (IF:6.9, Ranking:9/182, Engineering, Mechanical, Cites:34)
  7. Jin-Cherng Shyu, Kai-Shing Yang, Wei-Shen Chen, Shin-Ying Chang, and Chi-Chuan Wang, 2011, A Study of Bubble Venting in a Microchannel with Hydrophobic Nanoporous Membranes, Journal of Flow Visualization and Image Processing, 18, 1-10. (EI)
  8. Jin-Cherng Shyu, Keng-Wei Hsu, Kai-Shing Yang, and Chi-Chuan Wang, 2011, Thermal characterization of shrouded plate fin array on an LED backlight panel, Applied Thermal Engineering, 31, 2909-2915. (SCI) (IF:6.9, Ranking:9/182, Engineering, Mechanical, Cites:39)
  9. Chi-Chuan Wang, Kai-Shing Yang, Jhong-Syuan Tsai, and Ing Youn Chen, 2011, Characteristics of flow distribution in compact parallel flow heat exchangers, Part I: typical inlet header, Applied Thermal Engineering, 31, 3226-3234. (SCI) (IF:6.9, Ranking:9/182, Engineering, Mechanical, Cites:162)
  10. Chi-Chuan Wang, Kai-Shing Yang, Jhong-Syuan Tsai, and Ing Youn Chen, 2011, Characteristics of flow distribution in compact parallel flow heat exchangers, Part II: modified inlet header, Applied Thermal Engineering, 31, 3235-3242. (SCI) (IF:6.9, Ranking:9/182, Engineering, Mechanical, Cites:116)
  11. Yu-Lieh Wu, Kuo-Hsiang Chien, Kai-Shing Yang and Chia-Chung Lo, 2011, A Study on the Impact of Different Tumbler Inlet Conditions on the Clothes Dryer’s Tumbler Efficiency, Advanced Materials Research, 339, 188-192. (EI) (Cites:10)
  12. Chi-Chuan Wang, Wen-Jeng Chang, Chia-Hsing Dai, and Kai-Shing Yang, 2012, Effect of Inclination on the Convective Boiling Performance of A Microchannel Heat Sink Using HFE-7100, Experimental Thermal and Fluid Science, 36, 143-148. (SCI) (IF:3.3, Ranking:7/41, Physics, Fluids & Plasmas, Cites:78)
  13. Kai-Shing Yang, Tzu-Feng Chao, Ing Youn Chen, Chi-Chuan Wang, and Jin-Cherng Shyu, 2012, A Comparative Study of Nozzle/Diffuser Micropumps with Novel Valves, Molecules (Special Issue: Flow Chemistry), 17, 2178-2187. (SCI) (IF:4.6, Ranking : 76/239, Chemistry, Multidisciplinary, Cites : 38)
  14. Kuo-Hsiang Chien, Yur-Tsai Lin, Yi-Rong Chen, Kai-Shing Yang, and Chi-Chuan Wang, 2012, A novel design of pulsating heat pipe with fewer turns applicable to all orientations, International J. of Heat and Mass Transfer, 55, 5722-5728. (SCI) (IF:5.8, Ranking:19/182, Mechanics, Cites:230)
  15. Ing Youn Chen, Mei-Zuo Guo, Kai-Shing Yang, and Chi-Chuan Wang, 2013, Enhanced Cooling for LED lighting Using Ionic Wind, International J. of Heat and Mass Transfer, 57, 285-291. (SCI) (IF :5.8, Ranking:14/171, Mechanics, Cites:143)
  16. Jin-Cherng Shyu, Keng-Wei Hsu, Kai-Shing Yang, and Chi-Chuan Wang, 2013, Orientation effect on heat transfer of a shrouded LED backlight panel with a plate-fin array, International Communications in Heat and Mass Transfer, 42, 51-54. (SCI) (IF: 6.4, Ranking:11/171, Mechanics, Cites:16)
  17. Kai-Shing Yang, Chi-Hung Chung, Ming-Tsang Lee, Song-Bor Chiang, Cheng-Chou Wong, and Chi-Chuan Wang, 2013, An Experimental Study on the Heat Dissipation of LED Lighting Module Using Metal/Carbon Foam, International Communications in Heat and Mass Transfer, 48, 73-79. (SCI) (IF: 6.4, Ranking:11/171, Mechanics, Cites:63)
  18. Chih-Yung Tseng, Kai-Shing Yang, Kuo-Hsiang Chien, Ming-Shan Jeng, and Chi-Chuan Wang, 2014, Investigation of the performance of pulsating heat pipe subject to uniform/alternating tube diameters, Experimental Thermal and Fluid Science, 54, 85-92. (SCI) (IF:3.3, Ranking:7/41, Physics, Fluids & Plasmas, Cites :120)
  19. Chi-Hung Chung, Kai-Shing Yang, Kuo-Hsiang Chien, Ming-Shan Jeng and Ming-Tsang Lee, 2014, Heat Transfer Characteristics in High Power LED Packaging, Smart Science, 2, 1-6. (ESCI) (IF :1.4, Ranking:71/136, Multidisciplinary Sciences, Cites:16)
  20. Kai-Shing Yang, Chi-Hung Chung, Cheng-Wei Tu, Cheng-Chou Wong, Tsung-Yi Yang, Ming-Tsang Lee, 2014, Thermal spreading resistance characteristics of a high power light emitting diode module, Applied Thermal Engineering, 70, 361-368. (SCI) (IF:6.9, Ranking:9/182, Engineering, Mechanical, Cites:76)
  21. Kai-Shing Yang, Yu-Chi Cheng, Ming-Shan Jeng, Kuo-Hsiang Chien, and Jin-Cherng Shyu, 2014, An Experimental Investigation of Micro Pulsating Heat Pipes, Micromachines, 5, 385-395. (SCI) (IF : 3.0, Ranking : 49/111, Cites:41)
  22. Kai-Shing Yang, Chen-Chuan Lin, Jin-Cherng Shyu, Chih-Yung Tseng, and Chi-Chuan Wang, 2014, Performance and two-phase flow pattern for micro flat heat pipes, International J. of Heat and Mass Transfer, 77, 1115-1123. (SCI) (IF :5.8, Ranking:14/171, Mechanics, Cites:48)
  23. Kai-Shing Yang, Yu-Chi Cheng, Ming-Chung Liu, and Jin-Cherng Shyu, 2015, Micro Pulsating Heat Pipes with Alternate Microchannel Widths, Applied Thermal Engineering, 83, 131-138. (SCI) (IF: 6.9, Ranking:9/182, Engineering, Mechanical, Cites:93)
  24. Kai-Shing Yang, Tsung-Yi Yang, Cheng-Wei Tu, Chih-Ting Yeh, and Ming-Tsang Lee, 2015, A novel flat polymer heat pipe with thermal via for cooling electronic devices, Energy Conversion and Management, 100, 37-44. (SCI) ((IF : 10.9, Ranking : 2/79, Thermodynamics, Cites : 127)
  25. Kai-Shing Yang, Wei-Ting Ding, Chih-Ting Yeh, Ming-Tsang Lee and Chi-Chuan Wang, 2016, An experimental and analytical investigation of the photo-thermal-electro characteristics of a high power InGaN LED module, Applied Thermal Engineering, 98, 756-765. (SCI) (IF:6.9, Ranking:9/182, Engineering, Mechanical, Cites:22)
  26. Chih-Yung Tseng, Kai-Shing Yang, Kuo-Hsiang Chien, Shih-Kuo Wu, and Chi-Chuan Wang, 2016, A novel double pipe pulsating heat pipe design to tackle inverted heat source arrangement, Applied Thermal Engineering, 106, 697-701. (SCI) (IF:6.9, Ranking:9/182, Engineering, Mechanical, Cites:41)
  27. Kai-Shing Yang, Kun-Lin Ho, Kuo-Hsiang Chien, Jin-Cherng Shyu, 2016, Heat transfer of vapor chamber with different types of microchannels, International Journal of Green Energy, 13, 1325-1333. (SCI) (IF:3.1, Ranking:115/182, Energy & Fuels, Cites:11)
  28. Chien-Hung Sun, Chih-Yung Tseng, Kai-Shing Yang, Shih-Kuo Wu, and Chi-Chuan Wang, 2017, Investigation of the evacuation pressure on the performance of pulsating heat pipe, International C. in Heat and Mass Transfer, 85, 23-28. (SCI) (IF:6.4, Ranking:11/171, Mechanics, Cites:48)
  29. Kai-Shing Yang, Kai-Hsiang Lin, Cheng-Wei Tu, Yu-Zhen He, and Chi-Chuan Wang, 2017, Experimental investigation of moist air condensation on hydrophilic, hydrophobic, superhydrophilic, and hybrid hydrophobic-hydrophilic surfaces, International J. of Heat and Mass Transfer, 115, 1032-1041. (SCI) (IF:5.8, Ranking:14/171, Mechanics, Cites:111)
  30. Kai-Shing Yang, Cheng-Wei Tu, Wen-Hua Zhang, Chih-Ting Yeh and Chi-Chuan Wang, 2017, A novel oxidized composite braided wires wick structure applicable for ultra-thin flattened heat pipes, International C. in Heat and Mass Transfer, 88, 84-90. (SCI) (IF:6.4, Ranking:11/171, Mechanics, Cites:79)
  31. Kai-Shing Yang, Jian-Sin Wang, Shih-Kuo Wu, Chih-Yung Tseng and Jin-Cherng Shyu, 2017, Performance Evaluation of a Desiccant Dehumidifier with a Heat Recovery Unit, Energies, 10, 2006. (SCI) (IF:3.2, Ranking:121/182, Energy & Fuels, Cites:13)
  32. Chih-Yung Tseng, Ho-MengWu, Shwin-Chung Wong, Kai-Shing Yang and Chi-Chuan Wang, 2018, A Novel Thermal Module with 3-D Configuration Pulsating Heat Pipe for High-Flux Applications, Energies, 11, 3425. (SCI) (IF:3.2, Ranking:121/182, Energy & Fuels, Cites:22)
  33. Hafiz M. Daraghmeh, Mohammed W. Sulaiman, Kai-Shing Yang, Chi-Chuan Wang, 2018, Investigation of separated two-phase thermosiphon loop for relieving the air-conditioning loading in datacenter, Energies, 12, 105. (IF:3.2, Ranking:121/182, Energy & Fuels, Cites:25)
  34. Chih-Ting Yeh, Yen-I Chou, Kai-Shing Yang, Shih-Kuo Wu, Chi-Chuan Wang, 2019, Luminescence material characterizations on laser-phosphor lighting techniques, Optics Express, 27, 7226–7236. ( IF:3.3, Ranking:41/125, Optics, Cites:24)
  35. Kai-Shing Yang, Yu-Yang Huang, Yao-Hsien Liu, Shih-Kuo Wu, and Chi-Chuan Wang, 2019, Enhanced dehumidification via hybrid hydrophilic/hydrophobic morphology having wedge gradient and drainage channels, Heat and Mass Transfer, 55, 3359-3368. (IF:2.0, Ranking:44/79, Thermodynamics, Cites:14)
  36. Kai-Shing Yang*, Wei Lu, Yu-Lieh Wu, 2019, Visualization of Patterned Modified Surfaces in Condensation and Frosting States, Energies, 12(23), 4471. (IF:3.2 Ranking:121/182, Energy & Fuels, Cites:7)
  37. Kai-Shing Yang, Ming-Yean Jiang, Chih-Yung Tseng, Shih-Kuo Wu, Jin-Cherng Shyu, 2020, Experimental Investigation on the Thermal Performance of Pulsating Heat Pipe Heat Exchangers, Energies, 13(1), 269. (IF: 3.2, Ranking:121/182, Energy & Fuels, Cites:18)
  38. Chih-Yung Tseng, Kai-Shing Yang, Chi-Chuan Wang, 2020, Non-Uniform Three-Dimensional Pulsating Heat Pipe for Anti-Gravity High-Flux Applications, Energies, 13(12), 3068. (IF:3.2, Ranking:121/182, Energy & Fuels, Cites:23)
  39. Shao-Ming Li, Kai-Shing Yang, Chi-Chuan Wang, 2021, A semi-empirical model for predicting frost properties, Processes, 9(3), 412. (IF :2.8, Ranking:95/176, Engineering, Chemical, Cites:8 )
  40. Kai-Shing Yang, Yun-Sheng Chao, Chia-Hsing Hsieh, Min-Lun Chai, Chi-Chuan Wang, 2021, Performance of Commercially Open Refrigerated Showcases with and without Ice Storage—A Case Study, Processes, 9, 683. (IF :2.8, Ranking:95/176, Engineering, Chemical, Cites:4)
  41. Kai-Shing Yang, Yan-Lin Wu, Yi-Pin Chu, Yu-Lieh Wu, Shwin-Chung Wong, 2021, Performance Tests on a Novel Un-Finned Thermosyphon Heat Exchanger Requiring Single Charge, Processes, 9, 995. (IF:2.8, Ranking:95/176, Engineering, Chemical, Cites:4)
  42. Kai-Shing Yang, Hong-Yi Lin, Yu-Lieh Wu, Shih-Kuo Wu, Chi-Chuan Wang, 2021, Influence of Surface Modification on the Transient Dehumidification Performance of Fin-and-tube Heat Exchanger, International Journal of Heat and Mass Transfer, 173, 121202. (IF :5.8, Ranking:14/171, Mechanics, Cites:14)
  43. Kai-Shing Yang, Khalid Hamid, Shih-Kuo Wu, Uzair Sajjad, Chi-Chuan Wang, 2021, Experimental Analysis of a Heat Pump Dryer with an External Desiccant Wheel Dryer, Processes, 9(6), 1216. (IF:2.8, Ranking:95/176, Engineering, Chemical,Cites:16)
  44. Khalid Hamid, Uzair Sajjad, Kai-Shing Yang, Shih-Kuo Wu, Chi-Chuan Wang, 2022, Assessment of an energy efficient closed loop heat pump dryer for high moisture contents materials: An experimental investigation and AI based modelling, Energy, 238, 121819. (IF:9.4, Ranking:3/79, Thermodynamics, Cites:47)
  45. Yu-Lieh Wu, Jia-Wei Zheng, M. Muneeshwaran, Kai-Shing Yang, Chi-Chuan Wang, 2022, Moist air condensation heat transfer enhancement via superhydrophobicity, International Journal of Heat and Mass Transfer, 182, 121973. (IF:5.8, Ranking:14/171, Mechanics, Cites:41)
  46. Kai-Shing Yang, Jin-Cherng Shyu, and Ming-Tsang Lee. 2022. “Special Issue: ‘Emerging Technologies in Heating, Ventilation, Air Conditioning and Refrigeration (HVAC&R) Systems.’” Processes 10(7):1410. (IF :2.8, Ranking:95/176, Engineering, Chemical, Cites:3)
  47. Jia-Wei Zheng, Yu-Lieh Wu, Kai-Shing Yang, Bo-Wei Yu, Chi-Chuan Wang, 2023, Freezing processes for a vertically copper, superhydrophobic, and hybrid patterned surface – A visualization study, Applied Thermal Engineering, 228, 120447. (IF:6.9, Ranking:9/182, Cites:6)
  48. Kai-Shing Yang, Yun-Sheng Chao, Chia-Hsing Hsieh, Chi-Chuan Wang, 2023, A novel hybrid ice storage design applicable for commercial showcase with refrigerator and freezer, Journal of Energy Storage, 68,107898. (IF:9.8, Ranking:26/182, Cites:5)
  49. Kai-Shing Yang*, Jia-Wei Zheng, Kai-Lun Wu, Yu-Lieh Wu, 2023, Performance of the frosting characteristics of fin-and-tube heat exchanger subject to superhydrophobic coating, Applied Thermal Engineering, 235, 121338. (IF:6.9, Ranking:9/182, Cites:15)
  50. Kai-Shing Yang* and Kuan-Wen Chang, 2024, Experimental and Analytical Investigations on Heat Transfer Performance of Naphthalene Heat Pipe Heat Exchanger, Thermal Science and Engineering Progress, 49, 102478. (IF:5.4, Ranking:32/184, Engineering, Mechanical, Cites:1)
  51. Jia-Wei Zheng, Hong-Yi Lin, Chia-Hsing Hsieh, Yu-Lieh Wu, Kai-Shing Yang*, 2024, Wrap-around loop pulsating heat-pipe heat exchanger for enhancing the energy efficiency of high-tech cleanroom HVAC systems, International Journal of Low-Carbon Technologies, 19, 885-891. (IF:2.3, Ranking:34/79, Thermodynamics, Cites:2)
  52. Jia-Wei Zheng, Yu-Sheng Xie, Yu-Lieh Wu, Kai-Shing Yang, Chi-Chuan Wang, 2024, Influence of flow inertia on the frost formation for vertical surface with and without superhydrophobic coating, International Journal of Heat and Mass Transfer, 227, 125544. (IF:5.8, Ranking:14/171, Mechanics, Cites:4)
  53. Jia-Wei Zheng, Kai-Shing Yang, Yu-Lieh Wu, 2025, Falling film thickness distribution around a horizontal tube under countercurrent air flow, International Journal of Heat and Mass Transfer, 245, 127011. (IF:5.8, Ranking:14/171, Mechanics, Cites:3)
  54. Kai-Shing Yang, Jia-Wei Zheng, Shi-feng Zhuang, Shih-Kuo Wu, Chih-Hao Chen, Kai-Hsiang Lin, 2025, Performance analysis of the ionic liquid [EMIM][DEP] in absorption refrigeration systems, Results in Engineering, 26, 105411. (IF:7.9, Ranking:6/179, Engineering, Multidisciplinary, Cites:2)
  55. Kai-Shing Yang, Jia-Wei Zheng, Cheng-Han Lee, Chen-Yu Chiang, Ming-Tsang Lee, 2025, Flow pattern visualization and heat transfer characteristic analyses of a flat plate pulsating heat pipe, Smart Science, 1-15. (IF :1.4, Ranking:71/136, Multidisciplinary Sciences)
  56. Wei-Mon Yan, Chen-Yi Wang, Mohammad Amani, Kai-Shing Yang*, 2025, Experimental evaluation and optimization of ice storage-assisted commercial refrigeration for peak load shifting and energy efficiency enhancement, Energy Conversion and Management, 348, 120772. (IF:10.9, Ranking : 2/79, Thermodynamics)
  57. Jia-Wei Zheng, Kai-Shing Yang, Yu-Lieh Wu, 2026, Experimental study of the fluid flow characteristics and heat transfer performance of liquid films falling over horizontal tubes under countercurrent airflow, Applied Thermal Engineering, 284, 129194. (IF:6.9, Ranking:9/182, Engineering, Mechanical)
 
相關研究成果請參考下列網址：
https://scholar.google.com/citations?user=B4cO9qMAAAAJ&hl=zh-TW

職稱

title

職稱　教授
到校年月　2019-02-01

學歷

diploma

1.加州大學柏克萊分校 機械工程學系 訪問學者
2.國立雲林科技大學 工程科技研究所 博士
3.國立雲林科技大學 機械工程所 碩士
4.私立大葉大學 機械工程系 學士
5.國立雲林工專 動力機械工程系 專士

專長

expertise

1.節能技術
2.固態元件散熱
3.微動力系統
4.綠色能源